Description of Industrial Annealing and Tempering Car Bottom Furnace:
Heat Chamber: When we design the heat chamber, we optimize the insulation grade, thickness and density to fit your particular application. The Chamber construction we used all fiber, which can 60% energy saving than the brick and have the wonderful performance of thermal storage.
Door Design: The furnace door is typically integral to the car or can be fixed to the furnace body and vertically actuated to seal the chamber.The frame of the door is made by section steel and plate which have stronger rigidity. And inside overlapped the fire resistance fiber.
Car Design:?The Car is designed as self-propelled structure, which travelling is through the motor gear driving with the Chain.? The two seal methods are auto-labyrinth stucture and soft touch. also the car have equipped the limit switch and interlock, when the door open, auto-cut off the power of the heating elemnents, meanwhile recover the travelling power of the car. when the door cloosed,? auto-cut off the travelling power of the car , meanwhile recover the power of the heating elemnents
Heating System: If heated by electric resistance wire, The heating element is made by high temperature resistance alloy wire, which distributed at side of chamber, furnace door, back-wall, and car floor. If Heated by gas or fuel, all the burner nozzle arranged both side of chamber.